Mercuric Compound
Mercuric Acetate 98.5%
| Specifications | |
|---|---|
| Appearance | White crystalline powder |
| Assay | Min 98.5% |
| Chloride (Cl) | Max 0.03% |
| Sulphate (SO4) | Max 0.005% |
| Iron (Fe) | Max 0.001% |
| Mercury (I) (as Hg) | Max 0.5% |
| Substance not reducible with formic acid (Residue on ignition as SO4) | Max 0.1% |
Mercuric Acetate 99%
| Specifications | |
|---|---|
| Appearance | White crystalline powder |
| Assay | Min 99% |
| Substance insoluble in dilute acetic acid | Max 0.01% |
| Chloride (Cl) | Max 0.005% |
| Sulphate (SO4) | Max 0.005% |
| Nitrate (NO3) | Max 0.005% |
| Foreign heavy metals (as Pb) | Max 0.002% |
| Iron (Fe) | Max 0.001% |
| Mercury (I) (as Hg) | Max 0.3% |
| Substance not reducible with formic acid (Residue on ignition as SO4) | Max 0.02% |
Mercuric Chloride
We are instrumental in offering an exhaustive range of Mercuric Nitrate LR to our clients. These products are available in white crystalline powder and are used as reagent. Moreover, these products are also used in the manufacturing of felt and fulminat.
| Specifications | |
|---|---|
| Appearance | White crystalline powder |
| Assay (complexometric; on dried basis) | Min 98.0% |
| Identity | Passes test |
| Appearance of solution | Passes test |
| Solution in Ether | Passes test |
| Acidity or alkalinity | Passes test |
| Mercury (I) Chloride (HgCl2) | Passes test |
| Loss on drying (24 hrs in vacuum) | Max 1.0% |
Mercury Metal
| Specifications | |
|---|---|
| Appearance | Silvery white heavy metal |
| Assay | Min 99% |
| Appearance of solution | Passes test |
| Identity | Passes test |
| Substance insoluble in HNO3 | Max 0.002% |
Mercuric Oxide Yellow
| Specifications | |
|---|---|
| Appearance | Dark green powder |
| Dye content (by spectrophotometry) | Min 70.0% |
| Identity (UV/VIS spectrum) | Passes test |
| Absorption maxima in 50% ethanol | 596 - 599 nm |
| Specific absorptivity A 1%/1cm (lmax;0.0005%;ethanol 50%) | 980 - 1400 |
| TLC test | Passes test |
| Loss on drying ( at 50°C; <1hPa) | Max 25.0% |
| Suitability (for microscopy) | Passes test |
Mercurous Sulphate
| Specifications | |
|---|---|
| Appearance | White to yellow to beige powder |
| Assay (titration) | Min 96.0% |
Mercuric Nitrate
| Specifications | |
|---|---|
| Appearance | White to off white hygroscopic crystalline powder |
| Assay (ex Hg) | Min 98% |
| Residue after reduction | Max 0.05% |
| Chloride (Cl) | Max 0.005% |
| Sulphate (SO4) | Max 0.01% |
| Iron (Fe) | Max 0.005% |
| Potassium (K) | Max 0.01% |
| Sodium (Na) | Max 0.01% |
Mercuric Oxide Red
| Specifications | |
|---|---|
| Appearance | Reddish orange powder |
| Assay | Min 99% |
| Appearance of solution | Passes test |
| Impurities with an acidic or alkaline reaction | Passes test |
| Chloride (Cl) | Max 0.05% |
| Nitrate (NO3) | Passes test |
| Yellow mercury (II) oxide | Passes test |
| Substance not reducible with formic acid (Residue on ignition) | Max 0.05% |
| Loss on drying (at 105°C) | Max 0.5% |
Mercuric Sulphate
| Specifications | |
|---|---|
| Appearance | A white crystalline powder |
| Assay (ex Hg) | Min 98% |
| Chloride (Cl) | Max 0.01% |
| Iron (Fe) | Max 0.01% |
| Mercury (I) (as Hg) | Max 0.2% |
| Residue after reduction | Max 0.1% |
Chemical Products
- Aluminium Compound
- Ammonium Compound
- Antimony Compound
- Barium Compound
- Bismuth Compound
- Boric Acid
- Cadmium Compound
- Calcium Compound
- Cetramide
- Chemical Compound
- Chemical Element
- Copper Compound
- Cuprous Compound
- Ferric Compound
- Ferrous Compound
- Food Additives
- Gelatinous Substance
- Gum Powder
- Inorganic Compound
- Laboratory Chemicals
- Laboratory Equipment
- Lead Compound
- Lithium Compound
- Manganese Compound
- Magnesium Compound
- Magnesium Metal Turning
- Mercuric Compound
- Micrcoscopy Stains And Solutions
- Natural Oil
- Nickel Compound
- Organic Compound
- Potassium Compound
- Sodium Borohydride
- Speciality Chemicals
- Silver Compound
- Sodium Part I
- Sodium Part II
- Sodium Part III
- Strontium Compound
- Zinc Compound
